Agilent / HP E4418B Power Meter/ NEW 8481D Sensor/ Ref Atten/ Calibrated / Data

Description

Agilent
Power Measurement System - Calibrated
EPM E4418B Single Channel Power Meter
NEW 8481D Power Sensor
(10 MHz to 18 GHz; -70 to -20 dBm)
11708A 30 dB Reference Attenuator
11730A, 5-foot or 11730B 10-foot Cable
"Certificate of Calibration" and Performance Data
Manual on CD
Free Shipping for Domestic Buyers
International Buyers: eBay's International Standard Delivery or
Global Shipping Program
100% Satisfaction Guaranteed and 30 Day Return Privilege
We recondition, calibrate, and sell Hewlett-Packard Power Meters and sensors (E4419B, E4418B, 437B and 438A models) as well as other test and measurement equipment. If you need further information please message me. Also, my contact information may be found at EBAY's "about me" page.
This refurbished Hewlett-Packard EPM E4418B Power Meter and 8481D sensor are in excellent condition electronically and physically. They meet or exceed factory specifications. The E4418B has been refurbished and
calibrated using the procedure as prescribed in the HP/Agilent service manual. The equipment used for calibration is the 11683A Range Calibrator and other instrumentation as specified in the E4418B's calibration procedure. All instrumentation used to calibrate the E4418B is currently within calibration and is NIST traceable.
The photos of the E4418B in this listing may not be the instrument you will be receiving.
The 11683A Range Calibrator is for demonstration purposes only and is not part of this sale.
Included in this listing is a NEW injection molded case for the sensor and cable.
All equipment comes refurbished and calibrated with a 100% satisfaction guarantee and a 30 day return policy. The "Certificate of Calibration," "Performance Test Record," and "Adjustments and Calibration" documents will be included with the power meter system. The E4418B and 8481D "Certificate of Calibration"
will be issued prior to shipping and a current calibration sticker will be attached at that time.
International buyers shipping options:
1. eBay’s Global Shipping Program
2. eBay's International Standard Delivery
What is included:
Agilent Refurbished and Calibrated EPM E4418B High Performance Single Channel Power Meter
Agilent or Hewlett-Packard Calibrated 8481D Sensor (10 MHz to 18 GHz; -70 to -20 dBm)
Hewlett-Packard 11708A 30 dB Reference Attenuator
Hewlett-Packard / Agilent 11730A 5' (1.5 meter) or 11730B, 10' (3 meter) sensor cable
NEW injection molded case to hold sensor and cable
"Certificate of Calibration" for the E4418B and 8481D
"Performance Test Record" and adjustment and calibration procedures records
Manuals on CD ROM
New AC power cord
100% satisfaction guaranteed and 30-day return privilege
FREE domestic shipping to the USA.
Internationally Shipping: eBay's Global Shipping program or eBays International Standard Delivery
Description/Features:
The
Agilent EPM E4418B Power Meter
is designed for bench and automatic test equipment (ATE) use.
Fast measurement speed (up to 200 readings per second, over the GPIB, with E-series sensors)
Speed improvement of x2 using the 8480 series power sensor (compared to the 437B)
No range-switching delays with 8480 series sensors, and only one fast-range switch point with E-series sensors
Code compatibility with 437B and 436A power meters
GPIB connector for remote control of all functions
The
Keysight Agilent HP 8481D Power Sensor
, is designed for use with the EPM series, EPM-P series, 70100A, E1416A and 43x power meters, and provides extraordinary accuracy and stability. The Keysight Agilent HP 8481D, Power Sensor, gives you extremely low SWR, and is traceable to the U.S. National Institute of Standards and Technology (NIST). A calibration port is included with the above power meters for calibration with the power sensor. This calibration provides traceability to NIST, and it eliminates the uncertainties due to temperature changes and the variance in making measurements with different meter/sensor combinations.
10 MHz to 18 GHz operational frequency range
-70 to -20 dBm power measuring range
Excellent return loss
50 ohms
Diode detector
Calibrated and traceable to NIST
11708A Reference Attenuator:
The 11708A Reference Attenuator is a special 30 dB reference attenuator used for sensor calibration. It has a very low, S11, (VSWR) at 50 MHz. 50 MHz is the frequency of the 1 milliwatt reference port on the meter for sensor calibration purposes. The reference attenuator is only used for calibration purposes and should not be used for anything else. (The S11, VSWR, at other frequencies is quite high and the attenuation at frequencies other than 50 MHz will be inaccurate.
Packaging:
he E4418B Power Meter system will be professionally packaged in a 21" X 12" X 12" new shipping box. It will be surrounded by 2" of new, closed cell foam, on all six sides. This will insure that the instrument will be delivered safe and sound and without any damage.
Shipping:
The instrument will be insured and shipped to you within 24 hours via FedEx Ground.
Domestic - Free shipping to USA customers with a surcharge for AK, HI, and PR
International - eBay's Global Shipping Program, or eBay's International Standard Delivery
Returns:
This instrument may be returned to seller for any reason within 30 days.
Customer Service:
DXCONNECTION pledges to provide excellent customer service to
ensure 100% customer satisfaction. We guarantee shipping within 24 hours, FREE domestic shipping, 100% customer satisfaction, and a 30 day return guarantee policy on all items.
About DXCONNECTION:
DXCONNECTION
has been an EBAY seller since 2002. As such, we have a long history of satisfied EBAY customers. We are proud to be in EBAY's "
elite
" class of sellers which is very difficult to achieve and maintain. Performance and customer service are two of the metrics upon which we are evaluated.